Safe Checks Before You Call
- Check the breakerFind the double-pole breaker labeled "well" or "pump." If it's tripped, reset it once. If it trips again, leave it off and call, because repeated resets can damage the motor.
- Look at the pressure gaugeIt's usually near the pressure tank. Zero or near zero with the breaker on points to the pump, the wiring or the switch.
- Think about what changedWas there a thunderstorm, a power outage, or very heavy water use like filling a pool or running irrigation? Tell the pro. It speeds up the diagnosis.
Common Causes of a Sudden No-Water Call
Electrical
A tripped breaker, burned switch contacts, a lightning-damaged control box, or a failed wire splice down the well. Summer storms in the Hudson Valley are a frequent trigger.
Pump failure
A motor at the end of its life, or a pump that overheated from short-cycling or from running dry.
Pressure tank or switch
A waterlogged tank can wreck a switch. A clogged switch tube can stop the pump from ever turning on.
Low water in the well
Less common, but during a dry late summer some low-yield wells can't keep up with heavy use. The pump may need to rest, or the system may need a low-water cutoff.
What to Do While You Wait
- Keep bottled water on hand for drinking and cooking
- Don't run the dishwasher or washing machine
- Keep a few buckets of water for flushing toilets if you can
- Once water is back, run cold water at the kitchen tap first, and if it's cloudy or discolored, let it clear before drinking
Availability depends on the day and the local crew's schedule. When you call (329) 236-6005, a local pro confirms how soon someone can come out. We don't promise times we can't keep.
Questions
Is it safe to keep resetting the breaker?
No. Reset it once. If it trips again, there's an electrical fault or a pump drawing too much current, and repeated resets can make it worse.
Can a power outage kill my well pump?
Outages and especially lightning can damage pressure switches, control boxes and pump motors. If water doesn't come back after power returns, call for a diagnosis.
Will my water be safe after the repair?
Work inside the well can stir up sediment or bacteria. Many pros recommend running the water until it clears and, after major work, disinfecting the well and then testing for bacteria.
Related Services
Well Pump Repair & Replacement
Diagnosis and replacement of submersible and jet pumps, control boxes, wiring and pressure switches.
Learn more →Pressure Tanks & Switches
Waterlogged tank, rapid clicking, or pressure that pulses? Tank testing, recharging, switch and gauge replacement.
Learn more →Well Water Testing & Treatment
Lab testing for bacteria, iron, hardness, sulfur odor and more, then treatment sized to your actual results.
Learn more →New Well Drilling
New drilled wells for new homes, replacement wells, and wells that no longer keep up, plus pump and tank setup.
Learn more →Well Inspections for Home Sales
Flow and pressure testing, an equipment check, and lab water testing for buyers, sellers and lenders.
Learn more →Lost Water? Tell Us What Happened
Call or send the form with your town and what's happening.
- Tell us your town and whether you have any water at all
- Mention what you've noticed: clicking, sputtering, cloudy or smelly water
- A local well pro calls back and confirms availability and a typical price range
Request Well Service
Where This Service Is Available
Monroe, NY 10950, Chester, Warwick, Goshen, Harriman & Central Valley, Woodbury & Highland Mills, Washingtonville & Blooming Grove, Middletown, Newburgh, Florida, Pine Bush & Montgomery, plus Sugar Loaf, Greenwood Lake, Pine Island, Arden, Tuxedo, South Blooming Grove, Salisbury Mills, Cornwall and nearby communities. All service areas.