What's Going On With Your Well?
No water at all
Check the breaker and the pressure switch first (our no-water checklist shows how). If that doesn't bring it back, it's usually the pump, the control box, or the switch.
Pressure surges or drops
If the pressure pulses, the pump clicks on and off fast, or the shower fades to a trickle, the cause is often a waterlogged pressure tank, a worn switch, or a pump that's getting weak.
Water looks, smells or tastes off
Orange stains, a rotten-egg smell, cloudiness after rain, or scale on fixtures. Start with a lab water test, then treat only what the results show.
Well Services
Well Pump Repair & Replacement
Diagnosis and replacement of submersible and jet pumps, control boxes, wiring and pressure switches.
Learn more →No Water? Emergency Well Service
Lost water? Start with a quick breaker and switch check, then call to have a pro diagnose the pump, tank or switch.
Learn more →Pressure Tanks & Switches
Waterlogged tank, rapid clicking, or pressure that pulses? Tank testing, recharging, switch and gauge replacement.
Learn more →Well Water Testing & Treatment
Lab testing for bacteria, iron, hardness, sulfur odor and more, then treatment sized to your actual results.
Learn more →New Well Drilling
New drilled wells for new homes, replacement wells, and wells that no longer keep up, plus pump and tank setup.
Learn more →Well Inspections for Home Sales
Flow and pressure testing, an equipment check, and lab water testing for buyers, sellers and lenders.
Learn more →How It Works
- Call or send the formTell us the town and what's happening. Do you have no water, low pressure, or a water-quality problem?
- A local well pro follows upThey ask a few diagnostic questions, confirm when they can come out, and give you a typical price range.
- Diagnose, then fixOn site they test the electrical side, the tank and the pump before anything gets replaced, so you're not paying for parts you don't need.
Typical price ranges
- Submersible pump replacement often runs about $1,000–$2,800, depending on depth, pump size and wiring
- Pressure tank replacement is often about $700–$2,000 installed
- A basic lab water test is often about $50–$300. Larger panels cost more
- New drilled wells are usually priced per foot, and the total often lands in the $6,000–$15,000+ range
These are typical ranges, not quotes. Your price is confirmed after the pro sees the job.
Why Orange County wells are their own thing
In the southern and eastern parts of the county (Monroe, NY 10950, Woodbury, Warwick, Harriman) most wells are drilled into hard Highlands bedrock. In the valley towns around Goshen, Chester, Middletown and Montgomery, the rock and the water chemistry change. Local pros know which problems tend to show up where, like iron and hardness, sulfur odor, or wells that slow down in a dry late summer.
Orange County Towns We Cover
Monroe, NY 10950
Lake neighborhoods and hillside homes outside the village water district.
Chester
Village of Chester, Sugar Loaf and the rural Town of Chester along Routes 94 and 17M.
Warwick
Orchards, mountain roads and lake homes across the large Town of Warwick.
Goshen
The county seat's village plus farms and horse country in the surrounding town.
Harriman & Central Valley
Older village homes by the Route 17 / Thruway junction and wooded lots around Central Valley.
Woodbury & Highland Mills
Hillside subdivisions and country roads in northern Woodbury along Route 32.
Washingtonville & Blooming Grove
Village homes, Salisbury Mills and rural Blooming Grove along Routes 94 and 208.
Middletown
City of Middletown and the surrounding Town of Wallkill, including Scotchtown and Circleville.
Newburgh
Town of Newburgh neighborhoods around Orange Lake and Gardnertown that sit outside water districts.
Florida
Village of Florida and surrounding farmland near the black dirt region and Glenmere Lake.
Pine Bush & Montgomery
Rural Crawford and Montgomery, including Walden and Maybrook, under the Shawangunk Ridge.
Helpful Guides
Common Questions
I have no water. What should I check first?
Check the well breaker and reset it once. Look at the pressure gauge near the tank. If the breaker trips again or the gauge reads zero, call. See the no-water checklist.
How much does a well pump replacement cost?
Submersible pump replacement often runs about $1,000–$2,800, depending on depth, pump size and wiring. A local pro confirms the price after diagnosing the system.
Do you serve Monroe, NY 10950?
Yes. Monroe, NY 10950 in Orange County, plus Chester, Warwick, Goshen, Woodbury, Middletown, Newburgh and other Orange County towns.
Who actually does the work?
Calls are connected to independent local well contractors. They confirm availability, pricing and their credentials with you directly.
Request Well Service
Call for the fastest answer, or send the form. A local well pro confirms availability when they call back.
- Tell us your town and whether you have any water at all
- Mention what you've noticed: clicking, sputtering, cloudy or smelly water
- A local well pro calls back and confirms availability and a typical price range